The Full Face Fender is the middle ground between the smaller 'flexi-fenders' and the larger MugGuard.

A great option for riders who want the protection, without any bulk.

Lightweight. Discreet. Effective.

  • Innovative design - The profile folds to allow the fender to follow the shape of the wheel. It sits close to the rubber and overlaps the tyre width to catch anything thrown up at speed!
  • Central crease lines allow the 'roof' to be raised to achieved desired tyre clearance.
  • Stops any muck, gravel, pine needles and animal s*** being flung into your face.
  • Can be used on 26". 27.5" and 29" wheel sizes.
  • Flexible design with 5 fastening points - the fender hugs the fork and bridge profile to leave maximum tyre clearance and prevent mud clogging up inside.
  • Protects your fork stanchions, seals and bridge from getting caked, reducing the need for cleaning and servicing.
  • Discreet and effective - will not interrupt your ride!
  • Comes with genuine, high quality Velcro straps to attach to the fork - It's kind on the paintwork and makes fitting and removal a breeze. You can also choose zip-ties if you prefer.
  • Fitted correctly there is no movement or rattling.
  • One of the lightest and most versatile MTB mudguards available of it's size - at just 45g!
  • Compatible with forward and double bridge fork designs. 
  • Easy to clean as it's flexible and opens flat. Simply wipe it and you're done!
  • Made in the UK from recyclable plastic.


It's no secret that plastic is used in most of our products, and this is simply because it's the best material for the job.

As a responsible manufacturer we are committed to sustainability; to produce and sell our products with minimal waste, minimal packaging and we recycle everything we can along the way. Each product is designed to serve it's purpose over many years and is by no means a single use plastic. When a Mucky Nutz product does eventually reach the end of it's functional life, it can be fully recycled and we encourage customers to do so!

Industry reviews:

        Gearchase independant review:

        IMB International Mountain Bike Magazine review:

Product Code: MN0123
Colour: Black
EAN: 5060325480968

Length: 375mm
Width: 268mm
Mass: 45g

Design Protection: Pending

We are currently working on updating the fitting instructions across all of our products. 

In the meantime please follow the steps below. If you need assistance please get in touch!

Full Face Fender fitting instructions:


  1. Take the roll of Velcro and wrap it around the fork so it overlaps by an inch or so. Cut off that length and repeat the process for the other side of the fork.


  1. Now do the same on the bridge. You will end up with 2 longer lengths of Velcro for the fork and 3 shorter lengths for the bridge.


  1. Now take the fender, break off the hanger tab and tuck the rear ‘arms’ under the forward so that they overlap, then thread the longer length of Velcro through the aligned holes (fluffy side to the fork). Stick the Velcro together to hold the arms together whilst positioning the fender on the fork. Repeat on the other side.


  1. Position the fender onto the fork and tighten the 3 top Velcro straps around the bridge first so it pulls up flush, then tighten the lower arms around the fork.


  1. Lightly squeeze along the crease lines to bring the roof up to the desired tyre clearance and square the shape up – you’re all set to go!

Write a review

Please login or register to review

Full Face Fender, Black

  • Product Code: MN0123
  • Reward Points: 129
  • Availability: In Stock
  • £12.99

  • Ex Tax: £10.83
  • Price in reward points: 1299

Available Options

Related Products